TRAINING ELECTRIC SUBMERSIBLE PUMP

Training Principle Electric Submersible Pump

Training Maintenance Electric Submersible Pump

Description

This course is to summarize the state of the art of Electric Submersible Pump (ESP) technology. It included the example problems to illustrate the use of various theoretical solutions, it also listed an overview of conventional well productivity and Inflow Performance Relationship (IPR) technology and is general introduction to the latest methods of production optimization using ESP technology.
This course compiled as aid to engineers and production people in the Petroleum Industry who have the responsibility of planning and selecting electrically driven submersible pumping equipment. Included are fundamental principles involving sizing, operation and trouble shooting of submersible pump equipment. Also included are tables, data and general information which it will be value to everyone who utilize s submersible pumping equipment.

Much material of this course has been published previously and is reassembled in this course. However, there is also a considerable amount of new material included that will assist the participants of the course in their pump selection and operation.
Designing a submersible pump installation is not an exact science; it is mostly an art. But it is a talent which can be easily acquired if care and attention are paid to what the well is telling us, and what we want to do with the well. The well conditions vary from one well to other, but the basic information required for a design does not. What we require from a particular well must, of course, be within the limits of the well in question.

Submersible pump design provided information required for analyzing the behavior of a productivity well interval using rod pump. This thus makes it possible to answer some fundamental questions:
(a) What is the well producing capacity?
(b) What fluids do they produce?
(c) At what flow rates?
(d) What is the submersible pump to use?

In this course, it has also included example problems to illustrate the use of various theoretical solution. Wherever possible, it has not only discussed practical difficulties that one may encounter while using the theoretical solutions, but it has also listed some of the method that one can used to obtain the desired information. It also included descriptions on field histories wherever they were available and trouble shooting using submersible pump.

This course is mainly directed to the practicing professionals who make engineering calculations and decision on submersible pump application and trouble shooting. For managers, the course helps to review the present state of the art. It also outlined some of new method in artificial technology exist today. These gaps in technology will be useful for research engineers and research professionals to determine the areas of future research.

ELECTRIC SUBMERSIBLE PUMP OUTLINE

Chapter 1

Hydraulic& Electrical Fundamentals
* Introduction
* Hydraulic Fundamentals
* Centrifugal Pump Hydraulics
* Well Performance
* Electricity Fundamentals

Chapter 2

Equipment Description
* Introduction
* Centrifugal Pump
* Rotary Gas Separator
* Seal Section
* Electrical Submersible Motor
* Generalized Motor Composite Curves
* Motor Controllers
* VSC Effects on ESP Components
* Down hole Pressure
* Temperature Monitors
* Transformers
* Junction Box
* Wellhead
* Check Valve
* Drain Valve
* Backspin relay
* Centralizer
* Cable
* Cable Bands
* Motor Lead Extension

Chapter 3

Typical ESP Applications
* Introduction
* Shrouded Configuration
* Booster Pump
* Direct Production-Injection-System
* Horizontal Injection System
* Cantle slope Injection System
* ESP Installation with Deep Set Packer
* ESP Installation with Tool Bottom Intake
* Booster Pump
* Operation of Submersible Pumps in Harsh Environments

Chapter 4

Equipment Sizing
* Introduction
* Basic Data Required
* Sizing Procedure High-Water-Cut
* Sizing example : High-Water-Cut
* Effect of Viscosity on Centrifugal Pump Performance
* Sizing Procedure for Viscous Fluids
* Sizing Example: Viscous Fluids
* Sizing Procedure High GOR
* Sizing Example High GOR
* Sizing Procedure Variable Speed

Chapter 5

Installation Maintenance and Trouble shooting
* Introduction
* Equipment Transportation
* Equipment Handling
* Well Preparation
* Installation of Down hole Equipment
* Installation of Surface Equipment
* Starting ESP
* Testing
* Data Gathering
* Re-running Equipment
* Economic Evaluation
* Failure Analysis
* Ammeter Technology
* Field Checkout
* ESP Troubleshooting Chart

Chapter 6

Engineering Data
* Electrical Terms and Definition
* Useful Formulas
* Relationships Regarding Flow and Pressure drops in Pipes
* Temperature Rise in Pumps
* Measurement for Water Flow
* Areas of Circles
* Conversion Factors
* Temperature Conversion Table
* Fundamental Unit of Length, Area, Volume and Mass
* Conversion Factors For Units of Energy
* Casing and Tubing Sized and Capacities
* Stretch of Suspended Casing, Tubing or Drill Pipe
* Tubing Weight in Fluid
* Hydrostatic Head
* Well Temperature versus Current
* Absolute Viscosity of Gas-Free Crude Oil, Centipoises Absolute Viscosity of Gas-Saturated Crude Oil, Centipoises
* Pressure Loss Charts
* Flow Loss due to Friction in API. Pipe
* Inflow Performance relationship Equations

Chapter 7
* Installation, Operating and Trouble Shooting The Pump Chapter 8 Case Study and Discussion

Metode :

Kelas interaktif (ceramah dan studi kasus), metode penyelenggaraan dapat dilakukan melalui training online, training zoom ataupun training tatap muka

Jadwal Training :

Batch 1 : 23 – 24 Januari 2022
Batch 2 : 23 – 24 Februari 2022
Batch 3 : 8 – 9 Maret 2022
Batch 4 : 12 – 13 April 2022
Batch 5 : 18 – 19 Mei 2022
Batch 6 : 7 – 8 Juni 2022
Batch 7 : 27 – 28 Juli 2022
Batch 8 : 23 – 24 Agustus 2022
Batch 9 : 13 – 14 September 2022
Batch 10 : 11 – 12 Oktober 2022
Batch 11 : 9 – 10 November 2022
Batch 12 : 6 – 7 Desember 2022

Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan :

• Yogyakarta, Hotel Dafam Malioboro (7.250.000 IDR / participant)
• Jakarta, Hotel Amaris Tendean (7.750.000 IDR / participant)
• Bandung, Hotel Golden Flower (7.750.000 IDR / participant)
• Bali, Hotel Ibis Kuta (8.500.000 IDR / participant)
• Lombok, Hotel Jayakarta (8.750.000 IDR / participant)

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan

untuk Paket Group (Minimal 2 orang peserta dari perusahaan yang sama):

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
• FREE Transportasi Peserta ke tempat pelatihan .
• Module / Handout
• FREE Flashdisk
• Sertifikat
• FREE Bag or bagpackers (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2xCoffe Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive

Jadwal Pelatihan masih dapat berubah, mohon untuk tidak booking transportasi dan akomodasi sebelum mendapat konfirmasi dari Marketing kami. Segala kerugian yang disebabkan oleh miskomunikasi jadwal tidak mendapatkan kompensasi apapun dari kami.

 

Technorati Tags: training talent managemen berbasis nlp pasti jalan,training melakukan seleksi dan wawancara berbasis talent dan kompetensi pasti jalan,training listening,questioning & summarizing skills in competency interview pasti jalan,training psychological aspects of competency interview pasti jalan,pelatihan talent managemen berbasis nlp pasti jalan,pelatihan melakukan seleksi dan wawancara berbasis talent dan kompetensi pasti running