TRAINING PETROLEUM OPERATION MANAGEMENT FOR MANAGERS

Training Pengelolaan Operasi Petroleum Bagi Manajer

Training Production Operations For Solving Well Problems

What will participantS get?

After completing this course participants are expected to:
* Understanding the basic principles in performing calculations on the optimization of production operations of oil wells, gas and geothermal reservoir, the implementation of production optimization is to enhance the performance of the well and field production (Enhanced Oil Recovery)..
* Conduct simple diagnosis and understand the problem solving in the oil gas well operation.
* Be able to create a simple analysis of the data of oil wells, gas and geothermal.  Forecasting performance and plan the development of production operations
* Be able to conduct simple quantitative calculations from all the data acquisition, tubing, flowline, choke, perforated, gravel-packs, and subsurface safety valve in the well.  Plan the development of production based on the calculation of the production capacity of each well
* Using the knowledge of production operations for solving well problems, such as: cementing, scaling, sand, corrosion and formation damage that may occur in oil and gas wells.
* Understand the basic principles of production operation’s design: cementing, workover, well stimulation with acidizing and hydraulic fracturing,  and others

AUDIENCE:

* No specified  (Engineer or Non Engineer)

TRAINING MATERIAL OUTLINE :

1. The origin of Oil and Gas Reservoir  and Geologic Considerations in producing Operation
+ a.    Introduction
+ b.    Sandstone Reservoirs
+ c.    Geologic Factors Affecting Reservoir Properties in Sandstone
+ d.    Application of Geologic concepts in Specific Sandstone
+ e.    Carbonate Reservoirs
+ f.    Application of Geologic Concepts in Carbonate Reservoirs
2. Exploration Method of Oil and Gas Reservoir
+ a.    Magnetic Method
+ b.    Gravity Method
+ c.    Seismic Method
3. Introduction : Rotary Drilling Operations
+ a.    Steps to drilling a well
+ b.    Types of rigs
+ c.    Rig Components
+ d.    Rig Systems
4. Mud System
+ a.    General Equations and ConceptsDiagnostic tests
+ b.    Water based muds
+ c.    Oil based muds
+ d.    Additives
+ e.    Mud handling system
5. Cementing
+ a.    Tubing DesignFunctions of cement
+ b.    Cement Types
+ c.    Cement Additives
6. Oil Field Tubulars and Hydraulics
+ a.    Drill string
+ b.    Casing and tubing
+ c.    Casing classification
+ d.    Stresses on casing
+ e.    Casing setting depth
+ f.    Burst and collapse calculations
+ g.    Wellheads
7. Drilling System – Pressure Loss Calculations
+ a.    Hydrostatics
+ b.    Buoyancy
+ c.    Flow through pipes and annuli
+ d.    Flow path
+ e.    Pressure loss calculations
8. Drilling System – Bit & Nozzles
+ a.    Hydrostatics Bit Types
+ b.    Bit Parts
+ c.    Bit Classification
+ d.    Bit Nozzles
9. Introduction to Well Control
+ a.    Hydrostatics Definitions
+ b.    Causes of kicks
+ c.    Kick indicators
+ d.    Shut-in procedure
+ e.    Well Kill Procedures
10. Directional Drilling
+ a.    Reasons for directional wells
+ b.    Planning Trajectory
+ c.    Kickoff Methods
+ d.    Survey Methods
+ e.    Survey Calculations
+ f.    Hole Assemblies
11. Well Completion Design
+ a.    Factors Influencing Well Completion Design
+ b.    Conventional Tubular Configuration
+ c.    Unconventional Tubular Configurations
+ d.    Sizing Production Tubular
+ e.    Completion Interval
+ f.    Permanent Well Completions (PWC)
+ g.    Tubingless Completion
12. Perforating Oil and Gas Wells
+ a.    Introduction
+ b.    Types of Perforators
+ c.    Evaluation of Perforator Performance
+ d.    Factors  Affecting Gun Perforating Results
+ e.    Perforating in a Clean Fluid with Differential Pressure Into Wellbore
13. Production Logging Technology
+ a.    Introduction
+ b.    Logging Device
+ c.    Application of Through-Tubing Production logging
+ d.    Field Examples of Production Logging Techniques
+ e.    Primary Cement Evaluation
14. Problem Well Analysis
+ a.    Problem Wells
+ b.    Problem Well Analysis Checklist
15. Sand Control
+ a.    Introduction
+ b.    Reduction of Drag Force
+ c.    Mechanical Methods of Sand Control
+ d.    Practical Considerations in Gravel Packing
+ e.    Use of screen Without Gravel
+ f.    Resin Consolidation Methods
16. Formation Damage
+ a.    Introduction
+ b.    Basic Causes of Damage
+ c.    Classification of Damage Mechanisms
+ d.    Reduced Absolute Permeability
+ e.    Increased Fluid Viscosity (Emulsion)
+ f.    Diagnosis of Formation Damage
17. Acidizing
+ a.    Acid Additives
+ b.    Carbonate Acidizing
+ c.    Acidizing Techniques for Caronat Formations
+ d.    Sandstone Acidizing
+ e.    Potential Safety Hazard in Acidizing
+ f.    Acids Used in Well Stimulation
18. Hydraulic Fracturing
+ a.    Introduction
+ b.    Mechanics of Fracturing
+ c.    Production Increase from Fracturing
+ d.    Propping the Fracture
+ e.    Frac Fluids
+ f.    Frac Job Design
+ g.    Frac Job Evaluation Techniques
19. Scale Deposition Removal and Prevention
+ a.    Introduction
+ b.    Causes of Scale Deposition
+ c.    Prediction and Identification of Scale
+ d.    Scale Removal
+ e.    Scale Prevention
20. Corrosion Control
+ a.    The Corrosion Process
+ b.    Detection and Measurement of Corrosion
+ c.    Corrosion Control
21. Crude Oil and Gas Field Processing Sistem
+ a.    Separator and Principle of Separation
+ b.    Design of Separator
+ c.    Sweetening Process
+ d.    Oil and Dehydration
+ e.    Liquid Recovery Sistem
+ f.    Compression System
22. Principles of Measurement
+ a.    Introduction to Measurement
+ b.    Crude Oil Measurement
+ c.    Gas Measurement
23. Artificial Lift Method
+ a.    Gas Lift
+ b.    Submersible Pump
+ c.    Sucker Rod Pump
+ d.    Hydraulic Pump
24. Enhanced Oil Recovery Process:
+ a.    Classification of EOR methods
+ b.    Description of solvent miscible processes
+ c.    Description of chemical flood proves
+ d.    Description of thermal recovery processes
+ e.    Microbial and other EOR processes
+ f.    Objectives of EOR methods
+ g.    Types of solvents and miscibility development
+ h.    Polymer, alkaline, surfactant and mecellr-polymer
+ i.    In-situ combustion, cyclic steam and steam flood
+ j.    Comparison between various EOR methods
25. Screening Guidelines and Optimization :
+ a.    Key parameters used in reservoir screening
+ b.    Available resources and economical considerations
+ c.    Optimization parameters and criteria
+ d.    Concept of incremental recovery
+ e.    Limits on applicability of certain EOR methods
+ f.    Typical field cases of various EOR methods

Metode :

Kelas interaktif (ceramah dan studi kasus), metode penyelenggaraan dapat dilakukan melalui training online, training zoom ataupun training tatap muka

Jadwal Training :

Batch 1 : 23 – 24 Januari 2022
Batch 2 : 23 – 24 Februari 2022
Batch 3 : 8 – 9 Maret 2022
Batch 4 : 12 – 13 April 2022
Batch 5 : 18 – 19 Mei 2022
Batch 6 : 7 – 8 Juni 2022
Batch 7 : 27 – 28 Juli 2022
Batch 8 : 23 – 24 Agustus 2022
Batch 9 : 13 – 14 September 2022
Batch 10 : 11 – 12 Oktober 2022
Batch 11 : 9 – 10 November 2022
Batch 12 : 6 – 7 Desember 2022

Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan :

• Yogyakarta, Hotel Dafam Malioboro (7.250.000 IDR / participant)
• Jakarta, Hotel Amaris Tendean (7.750.000 IDR / participant)
• Bandung, Hotel Golden Flower (7.750.000 IDR / participant)
• Bali, Hotel Ibis Kuta (8.500.000 IDR / participant)
• Lombok, Hotel Jayakarta (8.750.000 IDR / participant)

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan

untuk Paket Group (Minimal 2 orang peserta dari perusahaan yang sama):

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
• FREE Transportasi Peserta ke tempat pelatihan .
• Module / Handout
• FREE Flashdisk
• Sertifikat
• FREE Bag or bagpackers (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2xCoffe Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive

Jadwal Pelatihan masih dapat berubah, mohon untuk tidak booking transportasi dan akomodasi sebelum mendapat konfirmasi dari Marketing kami. Segala kerugian yang disebabkan oleh miskomunikasi jadwal tidak mendapatkan kompensasi apapun dari kami.

 

Technorati Tags: training talent managemen berbasis nlp pasti jalan,training melakukan seleksi dan wawancara berbasis talent dan kompetensi pasti jalan,training listening,questioning & summarizing skills in competency interview pasti jalan,training psychological aspects of competency interview pasti jalan,pelatihan talent managemen berbasis nlp pasti jalan,pelatihan melakukan seleksi dan wawancara berbasis talent dan kompetensi pasti running